If you don't care about file paths containing '=' or ':', you can
stop reading now.
In tokens like
env var=/some/path
PATH=/bin:/usr/local/b
file completion starts after the last separator (#2178).
Commit db365b5ef8 (Do not treat \: or \= as file completion anchor,
2024-04-19) allowed to override this behavior by escaping separators,
matching Bash.
Commit e97a4fab71 (Escape : and = in file completions, 2024-04-19)
adds this escaping automatically (also matching Bash).
The automatic escaping can be jarring and confusing, because separators
have basically no special meaning in the tokenizer; the escaping is
purely a hint to the completion engine, and often unnecessary.
For "/path/to/some:file", we compute completions for "file" and for
"/path/to/some:file". Usually the former already matches nothing,
meaning that escaping isn't necessary.
e97a4fab71 refers us to f7dac82ed6 (Escape separators (colon and
equals) to improve completion, 2019-08-23) for the original motivation:
$ ls /sys/bus/acpi/devices/d<tab>
$ ls /sys/bus/acpi/devices/device:
device:00/ device:0a/ …
Before automatic escaping, this scenario would suggest all files from
$PWD in addition to the expected completions shown above.
Since this seems to be mainly about the case where the suffix after
the separator is empty,
Let's remove the automatic escaping and add a heuristic to skip suffix
completions if:
1. the suffix is empty, to specifically address the above case.
2. the whole token completes to at least one appending completion.
This makes sure that "git log -- :!:" still gets completions.
(Not sure about the appending requirement)
This heuristic is probably too conservative; we can relax it later
should we hit this again.
Since this reverts most of e97a4fab71, we address the code clone
pointed out in 421ce13be6 (Fix replacing completions spuriously quoting
~, 2024-12-06). Note that e97a4fab71 quietly fixed completions for
variable overrides with brackets.
a=bracket[
But it did so in a pretty intrusive way, forcing a lot of completions
to become replacing. Let's move this logic to a more appropriate place.
---
Additionally, we could sort every whole-token completion before every
suffix-completion. That would probably improve the situation further,
but by itself it wouldn't address the immediate issue.
Closes#11027
(cherry picked from commit b6c249be0c)
Mainly to make the next commit's diff smaller. Not much functional
change: since file completions never have the DONT_SORT flag set,
these results will be sorted, and there are no data dependencies --
unless we're overflowing the max number of completions. But in that
case the whole-token completions seem more important anyway.
(cherry picked from commit 0cfc95993a)
We capture the process already, and we use argv by reference for the
other cases.
argv can be big, and this reduces allocations and thereby memory usage
and speed.
E.g. `set -l foo **` with 200k matches has 25% reduced memory usage
and ~5% reduced runtime.
Wgetopt needs a ":" at the beginning to turn on this type of error.
I'm not sure why that is now, and we might want to change it (but tbh
wgetopt could do with a replacement anyway).
Fixes#11049
And leave the old behavior under the name "cancel-commandline".
This renames "cancel-commandline-traditional" back to
"cancel-commandline", so the old name triggers the old behavior.
Fixes#10935
This needs to be tested more, it has shown issues in MS conhost,
and potentially others.
Changing strategy after beta isn't the greatest idea.
This reverts commit 4decacb933.
See #10994
I believe this fixes more cases than it breaks. For example
this should fix Termux which seems to be popular among fish
users. Unfortunately I haven't yet managed to test that one.
Cherry-pick of all of
- e49dde87cc (Probe for kitty keyboard protocol support, 2025-01-03)
- 10f1f21a4f (Don't send kitty kbd protocol probe until ECHO is disabled, 2025-01-05)
- dda4371679 (Stop sending CSI 5n when querying for kitty keyboard support, 2025-01-05)
cursor_selection_mode=inclusive means the commandline position is
bounded by the last character. Fix a loop that fails to account
for this.
Fixes d51f669647 (Vi mode: avoid placing cursor beyond last character,
2024-02-14).
This change looks very odd because if the commandline is like
echo foo.
it makes us try to uppercase the trailing period even though that's
not part of word range. Hopefully this is harmless.
Note that there seem to be more issues remaining, for example Vi-mode
paste leaves the cursor in an out-of-bounds odd position.
Fixes#10952Closes#10953
Reported-by: Lzu Tao <taolzu@gmail.com>
(cherry picked from commit 69f0d960cf)
This can be used to get some information on how fish was built - the
version, the build system, the operating system and architecture, the
features.
(cherry picked from commit 6f9ca42a30)
If base directories (e.g. $HOME/.config/fish) need to be created,
create them with mode 0700 (i.e. restricted to the owner).
This both keeps the behavior of old fish versions (e.g. 3.7.1) and is
compliant with the XDG Base Directory Specification.
See: https://specifications.freedesktop.org/basedir-spec/0.8/#referencing
It is, as the name implies, unused - it became SIGSYS, which we
already check.
Since it is entirely undefined on some architectures it causes a build
failure there, see discussion in #10633
The libc crate has a bug on BSD where WEXITSTATUS is not an 8-bit
value, causing assertion failures.
Any libc higher than our 0.2.155 would increase our MSRV, see libc
commit 5ddbdc29f (Bump MSRV to 1.71, 2024-01-07), so we want to
woraround this anyway. It's probably not worth using a patched
version of libc since it's just one line.
While at it, tighten some types I guess.
Upstream fix: https://github.com/rust-lang/libc/pull/4213Closes#10919
Cherry-picked from c1b460525c
__fish_cancel_commandline was unused (even before) and has some issues
on multiline commandlines. Make it use the previously active logic.
Closes#10935
Cherry-picked from 5de6f4bb3d
* Pass path to install()
It was dirty that it would re-get $HOME there anyway.
* Import wcs2osstring
* Allow installable builds to use a relocatable tree
If you give a path to `--install`, it will install fish into a
relocatable tree there, so
PATH/share/fish contains the datafiles
PATH/bin/fish contains the fish executable
PATH/etc/fish is sysconf
I am absolutely not sold on that last one - the way I always used
sysconfdir is that it is always /etc. This would be easy to fix but
should probably also be fixed for "regular" relocatable builds (no
idea who uses them).
An attempt at #10916
* Move install path into "install/" subdir
* Disable --install harder if not installable
Commit 8bf8b10f68 (Extended & human-friendly keys, 2024-03-30) stopped
ctrl-c from exiting without a motivation. Unfortunately this was
only noticeable on terminals that speak the kitty keyboard protocol,
which is probably no one had noticed so far.
Closes#10928
This is allowed
time a=b echo 123
but -- due to an oversight in 3de95038b0 (Make "time" a job prefix,
2019-12-21) -- this is not allowed:
not time a=b echo 123
Instead, this one one works:
not a=b time echo 123
which is weird because without the "not" this would run "/bin/time".
It seems wrong that "not" is not like the others. Swap the order
for consistency.
Note that unlike "not", "time" currently needs to come before variable
assignments, so "a=b time true" is disallowed. This matches zsh. POSIX
shells call "/bin/time" here. Since it's ambiguous, erroring out seems
fine. It's weird that we're inconsistent with not here but I guess
"command not" is not expected to have subtly different behavior.
Closes#10890
This was added accidentally in 971d257e67 (Port AST to Rust,
2023-04-02). It does not seem to be causing an observable effect
(although I didn't try hard).
The values we would try are:
xterm-256color, xterm, ansi, dumb
This is a pretty useless list, because systems without
"xterm-256color" but with "ansi" basically don't exist,
and it is very likely that the actual terminal is more
xterm-compatible than it is ansi.
So instead we just use our xterm-256color definition, which has a high
likelihood of being basically correct.
This is fairly subtle.
When installable, and we either can't find the version file or it is
outdated, we ask the user to confirm installation (just like `--install`).
We do that only if we are really truly interactive (with a tty!) to
avoid `fish -c` running into problems.
This check could be tightened even more, because currently:
```fish
fish -ic 'echo foo'
```
asks, while
```fish
fish -ic 'echo foo' < /dev/null
```
does not.
`fish -c` will still error out if it can't find the config, but it
will just run if it is out of date.
fish will print messages for some jobs when they exit abnormally, such as
with SIGABRT. If a job exits abnormally inside the prompt, then (prior to
this commit) fish would print the message and re-trigger the prompt, which
could result in an infinite loop. This has existed for a very long time.
Fix it by reaping jobs after running the prompt, and NOT triggering a
redraw based on that reaping. We still print the message but the prompt is
not executed.
Add a test.
Fixes#9796
This built on my test system, might be version differences.
(it's also not enough to make it *work*, but a necessary step)
This reverts commit 6fded249cd.
Commit 29dc30711 (Insert some completions with quotes instead of
backslashes, 2024-04-13) wrongly copmletes
$ cat ~/space
to
$ cat '~/path with spaces'
Today completions can be either replacing or appending. We never quote
(but backslash-escape) appending completions (unless they "append"
to an empty token). We always quote replacing completions. The
assumption in this part of the code is that replacing completions
can be quoted without changing meaning.
This assumption is wrong for tildes. For the backslash-escaping code
path, we take care of this edge case via a special DONT_ESCAPE_TILDES
flag. However that flag does not take effect when using quotes for
escaping. Fix that.
Unfortunately, e97a4fab7 (Escape : and = in file completions,
2024-04-19) introduced a (hopefully temporary) code clone in
escape_separators, which made added an extra step to debugging here.
When built with the default "installable" feature, the data files (share/) are
included in the fish binary itself.
Run `fish --install` or `fish --install=noconfirm` (for
non-interactive use) to install fish's data files into ~/.local/share/fish/install
To figure out if the data files are out of date, we write the current version
to a file on install, and read it on start.
CMake disables the default features so nothing changes for that, but this allows installing via `cargo install`,
and even making a static binary that you can then just upload and have extract itself.
We set $__fish_help_dir to empty for installable builds, because we do not have
a way to generate html docs (because we need fish_indent for highlighting).
The man pages are found via $__fish_data_dir/man
This now allows:
- Same argument (`random 5 5`)
- Swapped ends (`random 10 2`)
- One possibility (`random 0 5 4`)
This makes it easier to use with numbers generated elsewhere instead
of hard-coded, so you don't need to check as much before running it.
Fixes#10879
We don't really care if the process has a custom handler installed, we
can just set it to default.
The one we check is SIGHUP, which may be given to us via `nohup`.
This saves ~30 syscalls *per process* we spawn, so:
```fish
for f in (seq 1000)
command true
end
```
has ~30000 fewer rt_sigaction calls. These take up about ~30% of the
total time spent in syscalls according to strace.
We could also compute this set once at startup and then reuse it.
